Dewalt Nail Gun Twin Pack Best Price: A pair of DeWalt DCK264P2 18-volt XR brushless nail guns price is $20. The DeWalt DCK264P2 cordless twin set includes a DCN692 framing nailer and a DCN660 second fix nailer. Both of these professional-grade Brushless tools are powered by DeWalt’s 18v XR lithium-ion battery technology. The DCN692 frame nailer’s brushless motor ensures powerful performance and longer runtimes by allowing the machine to be optimized for different-length nails.
DCN692’s Features and Benefits
The nailer has two speeds to accommodate a wide range of nail lengths (or power levels). When firing short nails, longer runtime, faster readiness to fire, decreased recoil, and increased durability are all advantages. With this magazine’s adaptable 30° to 34° magazine angle, you can use wire weld collated frame nails or most clipped head paper tape. Changing the depth is simple with the thumbwheel depth adjustment. The nailer’s ergonomic design allows it to easily fit between 400mm center studs.
Tool-free stall/jam clearance means less downtime. If the magazine does not contain nails, the dry fire lockout stops the tool from firing. The user can enable contact trip lock-off to prevent the fastener from being mistakenly discharged. DeWalt’s DCN692N is a good example. Class-leading vibration and sound figures provide excellent user protection. Most clipped-head and off-center round head paper tape or wire-weld collated frame nails can be accommodated at a 30 to 34-degree magazine angle.
Dewalt DCK264P2 18V Brushless 2 x 5.0Ah Batteries
The reversible belt/rafter hook gives you more portability and versatility on the job site. Changing the depth of the shot is simple with the thumbwheel depth adjustment. The non-mar contact travel protects the work surface in addition to increasing visibility and durability. The ergonomic shape of the nailer allows it to fit easily between two 400mm center studs. the distance between the stud. Running a vehicle without using gas can save a significant amount of money.
The period of time a user is unable to use their gadget is reduced. The lack of trailing cords eliminates the annoyance as well as the potential of injury that comes with using a typical configuration. The user can employ contact trip lock-off to prevent the fastener from being mistakenly discharged. If the magazine does not contain any nails, dry fire lockout stops the tool from firing. Downtime can be reduced with the use of no-tool stalls and jam clearing. The Dewalt is just as good as the tacwize corded electric finish nailers and Paslode 1st repair nailers that I’ve used in the past. These nailers’ bump features work effectively, and they’re faster or at least as fast as any other cordless nailer.
The DCN660N is a Dewalt tool
The 18V XR Li-Ion Brushless 16Ga Nailer is the industry’s most advanced nailing instrument. It’s impossible to beat the BRUSHLESS motor’s runtime in such a small package. The tool’s tiny, lightweight, and ergonomic design makes it simple and comfortable to use while still being tough enough for the job. Mechanical operation is more cost-effective than gas-powered operation at lower temperatures. The user can manufacture nails at a rate of up to 4 nails per second in the bump operating mode. The thumbwheel depth adjuster makes it simple to change the driving depth.
Unintentional discharging of the fastener is Prohibited
Brushless and gas-free nailer twin kits include 1st and 2nd repair nailers. When firing short nails, brushless motors provide better durability and longer run times than conventional motors. Consistent performance in the harshest circumstances, from -20°C to 50°C, may be obtained with mechanical, gas-free operation with no maintenance. LED fault warnings, tool-free jam clearance, and reversible belt/rafter hooks are all included in the two tools’ features. Two modes of operation are available: sequential and bump.
Framing nails can be fired at a rate of up to two per second by the 1st fix nailer. Having two speeds (power levels) allows the nailer to be utilized for a wide range of nail lengths. When using dipped head or off-center paper tape or wire weld collated framing nails, the 30-34° magazine angle is a versatile mounting option. A contact trip lock-off switch prevents the unintended discharge of the fastener by stopping the tool from firing without nails in the magazine. 16G nails can be fired at up to four nails per second from the 2nd fix nailer. It comes with a non-marking tip.
Stall-release, thumb wheel depth adjustment, trigger, and contact trip lock-off prevent unintended discharge of fastener. Poorly lit locations are better illuminated with LED work lights. State-of-charge indicators are standard on high-capacity batteries. After graduating from high school, Raymond E. DEWALT continued in his father’s footsteps and worked in industries and construction. He experienced the difficulty of exorbitant labor prices in all of his undertakings. Whenever possible, he installed a machine to meet certain specifications in order to decrease these expenditures.
As luck would have it one fine day, M. DEWALT was appointed to oversee a lumberyard that produced a wide range of commodities, including everything from simple boxes to complete houses. The company’s workload had outstripped its capacity, but the owner couldn’t afford to add extra personnel. The only choice was to increase the amount of effort his employees were doing. It was M. DEWALT who built a yoke that he connected directly to an electric motor and a saw. Afterward, he attached it to a regular arm.
It’s the DCN692 2-Speed First Fix Nailer
There are two speeds (or power levels) on this nailer so that it can shoot nails of varying lengths with ease. 90mm ring shank nails can be shot into light wood with this technology, while 63mm ring shank nails may be fired into strong wood with it. There are two settings on the nailer. Choosing between the sequential and bump operating modes provides you control over how exact your placements will be. There are no cleaning or service requirements due to its mechanical rather than gas operation. The period of time a user is unable to use their gadget is reduced.
Using the DCN692’s adjustable 30-34° magazine angle, it can handle most clipped head and off-center round head paper tape or wire weld collated framing nails. Changing the depth of the shot is simple with the thumbwheel depth adjustment. The nailer’s vibration and sound statistics are good, offering excellent protection for the operator. The ergonomic design of the instrument makes it feasible for the nailer to be conveniently inserted between two 400mm center studs. A reversible belt/rafter hook enables increased mobility and agility on the job site.
In addition to increased visibility and durability, the non-mar contact trip with lock-off prevents accidental discharge of the fastener from the work surface. Only a damp packaging stopped the item from being wrecked despite a week-long standoff with Prime delivery and the item being left on my porch in front of all passersby. Protected the contents of the watertight and airtight case well.
Despite the fact that these nailers came with two 5AH batteries, I decided to test them with my 2AH battery instead. Battery-powered Nailers perform incredibly effectively. Two boxes of 32mm and 50mm brads have been used with DCN660 without a single jam or miss fire. To accomplish the same effects, we likewise utilized 500 or more 90mm smooth shank nails All of the nails were driven flush with or below the surface of the wood in every case.
